Species · Sulfides

Cubanite

Cubanite is CuFe2S3: orthorhombic, brass-yellow to bronze-yellow, hardness 3.5, density 4.03–4.18, strongly magnetic. Its Cuba type analysis, recast by script.

Formula (IMA, September 2026) CuFe2S3; status G (grandfathered), 1843; country Cuba. The Handbook sheet writes the same formula. Isocubanite, A, 1983 s.p., Pacific Ocean, is the other CuFe2S3 rowComposition, worked Cu 23.41%, Fe 41.15%, S 35.44% by mass (formula mass 271.42); the sheet’s ideal column prints 23.42, 41.15 and 35.43Crystal system and habit Orthorhombic, point group 2/m 2/m 2/m, space group Pcmn; crystals elongated parallel to [001], thick tabular {001} and {110}, {001} striated parallel to [010], to 3 cm; also massiveTwinning Common with twin plane {110}, in pairs, also as fourlings and sixlings, which then look pseudohexagonalParting, hardness, density Parting on {110} and {1−30}; fracture conchoidal; hardness 3.5; density 4.03–4.18 measured, 4.024 calculated; a 20.00 g piece reads 15.04–15.22 g in waterMagnetism (sheet) “Strongly magnetic.” USGS Open-File Report 99-529, Table 1, has no cubanite rowColour Brass-yellow to bronze-yellow; opaque. The sheet prints no streak and no Luster fieldThe Cuba recast The type-locality analysis, Barracanao, recasts to Cu1.071Fe2.062S3, 4.4% metal-rich; the Prince William Sound analysis to Cu1.008Fe2.007S3Type locality and name Barracanao, Cuba, marked [TL] on the sheet; named for its occurrence in Cuba; type material Mining Academy, Freiberg, 5467

Cubanite is CuFe2S3, an orthorhombic copper iron sulfide: brass-yellow to bronze-yellow, hardness 3.5, density 4.03 to 4.18, and printed “Strongly magnetic” on its Handbook sheet. Its type locality is Barracanao, Cuba, yet that analysis recasts to Cu1.071Fe2.062S3, 4.4% rich in metal; the Prince William Sound analysis, Cu1.008Fe2.007S3, is the one that reproduces the formula.

In short

  • The species. The September 2026 IMA-CNMNC Master List lists cubanite as CuFe2S3, status G, 1843, Cuba. The Handbook of Mineralogy sheet gives orthorhombic, Pcmn; crystals elongated along [001] or thick tabular, to 3 cm, often twinned into pseudohexagonal fourlings and sixlings; hardness 3.5; density 4.03–4.18; brass-yellow to bronze-yellow. Worked, it is 23.41% copper, 41.15% iron and 35.44% sulfur.
  • The Cuba recast. Divide each analysed weight per cent by its atomic weight and scale to three sulfur. The Barracanao analysis, from the sheet’s marked type locality, gives Cu1.071Fe2.062S3: 3.133 metal atoms where the formula has 3. The Prince William Sound, Alaska, analysis gives Cu1.008Fe2.007S3, 0.5% over. The type-locality analysis is not the one that fits the formula best.
  • Is cubanite magnetic? Its sheet says “Strongly magnetic.” Of its intergrowth partners, the chalcopyrite and pentlandite sheets print no magnetic property, and pyrrhotite prints “Magnetic, varying in intensity inversely with iron content.” The USGS Open-File Report 99-529, Table 1 has no cubanite row, so no separator figure is quoted here.
  • Documented failure: the bench tests. Brass-yellow, hardness 3.5 against 3.5–4, and a 20.00 g piece reading 15.04–15.22 g in water against chalcopyrite’s 15.12–15.35 g: colour, scratch and scale all overlap. A second failure sits on the dimorph: isocubanite’s printed density, [3.93], is not reproduced by its own cell, which gives 4.030.
  • Where it forms. The sheet: “In hydrothermal deposits formed at relatively high temperature, in pyrrhotite–pentlandite ores in which it commonly occurs as intimate oriented intergrowths with chalcopyrite,” and it “may exsolve from chalcopyrite below about 200 °C–210 °C.” Its Distribution field says it “may be an important ore mineral” and names Sudbury, Chibougamau, Broken Hill, Noril’sk and two meteorites.
The Cuba recast: cubanite against its dimorph isocubanite and its intergrowth partner chalcopyrite, every figure from the three Handbook of Mineralogy sheets, the September 2026 IMA list and USGS OFR 99-529 Table 1. Analyses recast by script (weight per cent ÷ standard atomic weight, scaled to the formula’s sulfur); in-water weight of a 20.00 g piece = 20 − 20/D; cell density = Z × M × 1.66054 / V
CriterionCubaniteIsocubaniteChalcopyriteDoes it separate them?
IMA formula; statusCuFe2S3; G, 1843, CubaCuFe2S3; A, 1983 s.p., Pacific OceanCuFeS2; G, 1725 ?, unknownCubanite from chalcopyrite, by analysis; not from isocubanite
Cu, Fe, S by mass, worked23.41, 41.15, 35.44%23.41, 41.15, 35.44%34.63, 30.43, 34.94%By analysis only
Sheet analysis, recastBarracanao [TL]: Cu1.071Fe2.062S3; Prince William Sound: Cu1.008Fe2.007S3East Pacific Rise [TL]: Cu0.903Fe2.016Zn0.040S3Western mines, Vancouver Island: Cu1.011Fe1.018S2Yes: iron per copper near 2 against near 1
Metal atoms per the formula’s sulfur count3.133 (Barracanao); 3.015 (Prince William Sound); ideal 32.959; ideal 32.029; ideal 2No: all near 1 per S
Crystal system (sheet)Orthorhombic, PcmnCubic, Fm3mTetragonal, I−42dOnly with X-ray data
Colour (sheet)Brass-yellow to bronze-yellowBronze; pinkish brown in reflected lightBrass-yellow, may be tarnished and iridescentNo
Hardness (Mohs)3.5Not determined (VHN 175)3.5–4No
Density, measured4.03–4.18Not determined; [3.93] calculated4.1–4.3No
20.00 g piece in water15.04–15.22 g—15.12–15.35 gNo: the ranges overlap
Density from the cell, worked4.024, the printed 4.024 exactly4.030 (Z = 4/3), against the printed [3.93]4.202, against the printed 4.283Reported, not corrected
Magnetism (sheet)“Strongly magnetic”None printedNone printedYes, as printed
USGS OFR 99-529 Table 1No rowNo row.30–1.70 A; best .70–1.30, dcNo cubanite figure exists to compare
Streak (sheet)Not printedNot printedGreenish blackNot on the sheets
How the sheets relate themMay exsolve from chalcopyrite below about 200 °C–210 °CFormed from cubanite by heating to between 200 °C and 270 °CHosts oriented cubanite intergrowthsContext only

What is cubanite? Formula, type locality and IMA status

A copper iron sulfide with two irons to each copper. The September 2026 IMA-CNMNC Master List lists cubanite as CuFe2S3, status G (grandfathered), 1843, country Cuba; the reference column cites American Mineralogist 77 (1992), 937. The Handbook of Mineralogy cubanite sheet writes the same formula and says it is “Dimorphous with isocubanite”, which has its own IMA row, CuFe2S3, A, 1983 s.p., Pacific Ocean. With Cu 63.546, Fe 55.845 and S 32.06 the formula mass is 271.42: 23.41% copper, 41.15% iron, 35.44% sulfur. The sheet’s ideal column prints 23.42, 41.15 and 35.43, the same within rounding; is chalcopyrite a sulfide uses the 23.41.

What the sheet records. Orthorhombic, point group 2/m 2/m 2/m, space group Pcmn, a = 6.467, b = 11.117, c = 6.231 Å, Z = 4. Crystals are elongated parallel to [001], or thick tabular on {001} and {110}, with {001} striated parallel to [010], to 3 cm; also massive. Twinning is common with twin plane {110}, in pairs and as fourlings and sixlings, which then look pseudohexagonal. It has parting, not cleavage, on {110} and {1−30}, the index read from the rendered sheet; fracture conchoidal; hardness 3.5; density 4.03–4.18 measured, 4.024 calculated. The cell gives 4.024 exactly. A 20.00 g piece reads 15.04 to 15.22 g in water, on the method at how to measure specific gravity at home.

Type locality and name. The Distribution field opens “From Barracanao, Cuba [TL]”, so here the type locality is marked; the term is explained at what is a type locality. The name is “For its occurrence in Cuba”, and the type material is at the Mining Academy, Freiberg, Germany, 5467.

How close is cubanite to CuFe2S3? The Cuba recast

Method. The sheet prints three columns: (1) Barracanao, Cuba, Cu 24.32, Fe 41.15, S 34.37, total 99.84; (2) Prince William Sound, Alaska, Cu 23.52, Fe 41.14, S 35.30, total 99.96; (3) ideal CuFe2S3. A script divided each weight per cent by its standard atomic weight and scaled the result to three sulfur atoms, the formula’s count. The same was done for the isocubanite sheet’s East Pacific Rise microprobe analysis and, to two sulfur, for chalcopyrite’s Western mines analysis.

Result. Barracanao gives Cu1.071Fe2.062S3: 3.133 metal atoms per three sulfur, 4.4% over the formula, with iron at 1.925 per copper. Prince William Sound gives Cu1.008Fe2.007S3: 3.015 metals, 0.5% over, iron 1.991 per copper. The type-locality analysis is therefore the looser fit; the Alaskan one reproduces CuFe2S3 to within 0.01 atom on both metals. The sheet does not say why the Cuban figures run high in metal, and this page does not offer a reason.

What separates it from chalcopyrite. The ratio of iron to copper: about 2 in cubanite and 1 in chalcopyrite, whose Western mines analysis recasts to Cu1.011Fe1.018S2. Metals per sulfur do not separate them, since both formulas balance one metal atom per sulfur. The isocubanite analysis, Cu0.903Fe2.016Zn0.040S3, is copper-poor by 9.7% and carries zinc, but its iron per sulfur still sits at the cubanite figure. The one-to-one ratio check across all eleven copper iron sulfides is on is chalcopyrite a sulfide and is not repeated here.

Is cubanite magnetic?

Its sheet says so in two words. The Physical Properties field ends “Strongly magnetic.” That is the whole statement: the sheet gives no measured susceptibility, no temperature and no comparison. The USGS Open-File Report 99-529, Table 1, Rosenblum and Brownfield’s separator table, has no cubanite row and no isocubanite row, so no amperage figure is quoted here, as is pyrrhotite magnetic also records.

Against the minerals it grows with. The sheet places cubanite in pyrrhotite–pentlandite ores, intergrown with chalcopyrite. Their sheets print: pyrrhotite, “Magnetic, varying in intensity inversely with iron content”; pentlandite, nothing; chalcopyrite, nothing; isocubanite, nothing. Table 1 puts pyrrhotite at less than .01 to .70 A, best .01 to .05; pentlandite at less than .01 to .30, best .01; chalcopyrite at .30 to 1.70, best .70 to 1.30, marked dc, depends on chemistry. In one ore, then, a pull from a brass- or bronze-yellow grain is consistent with cubanite and equally with pyrrhotite; the pentlandite question is on is pentlandite magnetic and the general survey on which minerals are magnetic.

Documented failure: everything but the magnet. Brass-yellow to bronze-yellow against brass-yellow; hardness 3.5 against 3.5 to 4; 15.04 to 15.22 g in water against chalcopyrite’s 15.12 to 15.35 g. The sheet prints no streak and no lustre for cubanite, which is why the lustre ledger on is sphalerite a sulfide lists it among the six sheets it cannot read. Without the magnet, the sheets give a collector nothing to separate the two in the hand.

Cubanite, isocubanite and chalcopyrite: how the sheets relate them

Exsolution and heating, as printed. The cubanite sheet says it “may exsolve from chalcopyrite below about 200 °C–210 °C” and is “A rare constituent of some carbonaceous chondrite meteorites.” The isocubanite sheet says isocubanite is the cubic dimorph, “from which it can be formed by heating to between 200 °C and 270 °C”, occurring “around modern undersea ‘black smoker’ chimneys”, in hydrothermal copper sulfide deposits and in pumice. It describes euhedral grains and cubo-octahedra to 400 µm, intergrown with chalcopyrite and rimming cubanite. Those are statements about the two sheets, not a phase diagram, and none is extended here.

Documented failure: isocubanite’s printed density. The isocubanite sheet prints a cell of a = 5.303 Å with Z = [4/3] and a calculated density of [3.93], both bracketed. Worked, 4/3 formula units in 149.13 ų give 4.030, not 3.93; the same arithmetic reproduces cubanite’s 4.024 exactly and gives chalcopyrite 4.202 against its printed 4.283, as is chalcopyrite a sulfide records. The isocubanite sheet prints no measured density or hardness, so no in-water figure is given for it.

Where is cubanite found? The sheet’s locality list

Distribution, as printed. “Numerous localities; may be an important ore mineral.” From Barracanao, Cuba [TL]. In the USA, at Fierro, Grant Co., New Mexico; the Christmas mine, Gila Co., Arizona; Prince William Sound, Alaska. In Canada, the Strathcona mine, Sudbury, Ontario, and exceptional crystals from Chibougamau, Quebec. In Sweden, Tunaberg, Södermanland; Kaveltorp, near Ljusnarsberg, Örebro; Kalkugnstorp, 70 km west of Stockholm. Virtasalm, Finland. Traversella, Piedmont, Italy. The Morro Velho gold mine, Nova Lima, Minas Gerais, Brazil. Broken Hill, New South Wales, Australia. The Noril’sk region, western Siberia, Russia. And the Orgueil and Alais carbonaceous chondrite meteorites.

Ore, on the sheet’s wording only. The sheet says cubanite “may be an important ore mineral” and names no ore locality; this page does not extend the word. Its associates are chalcopyrite, pyrite, pyrrhotite, pentlandite and sphalerite. More copper and iron sulfides are in the species index. We hold no catalogue and nothing here is offered for sale; the wanted list is the only commercial route.

Questions

What is the formula of cubanite?
CuFe2S3, on the September 2026 IMA list and the Handbook of Mineralogy cubanite sheet. Worked, it is 23.41% copper, 41.15% iron and 35.44% sulfur by mass.
Is cubanite magnetic?
Its Handbook sheet prints “Strongly magnetic.” The USGS Open-File Report 99-529, Table 1 has no cubanite row, so there is no separator figure to quote; chalcopyrite’s sheet prints no magnetic property.
How do you tell cubanite from chalcopyrite?
By analysis: about two irons per copper in cubanite, one in chalcopyrite. Colour, hardness (3.5 against 3.5–4) and in-water weight overlap; only the printed magnetism differs in the hand.
Where is the type locality of cubanite?
Barracanao, Cuba, marked [TL] on its Handbook sheet; the IMA list gives Cuba. The name is for its occurrence in Cuba.
Is cubanite an ore of copper?
Its sheet says it “may be an important ore mineral” and names no ore locality. It is 23.41% copper by mass, against chalcopyrite’s 34.63%.