Species · Silicates

Sapphirine

Sapphirine, Mg4(Mg3Al9)O4[Si3Al9O36]: a blue to green Mg–Al silicate, hardness 7.5, density 3.40–3.58. Not sapphire, which is corundum at hardness 9 and 3.98+.

Formula (IMA, September 2026) Mg4(Mg3Al9)O4[Si3Al9O36]; status G, 1819; country Denmark (Greenland); the sheet marks no type localityFormula on the Handbook sheet (Al,Mg)8(Al,Si)6O20. The IMA formula, halved to 20 oxygens, is Mg3.5Al9Si1.5O20Composition, worked 66.50% Al2O3, 20.44% MgO and 13.06% SiO2 by mass from the IMA formula; the sheet’s Fiskenæsset analysis reads 65.29, 19.78 and 12.83Crystal system and habit Monoclinic or triclinic, point group 2/m or -1; crystals indistinct, tabular on {010}, to 3 cm; commonly as disseminated grains or aggregates; polytypes 1A, 2A, 2M, 3A, 4M and 5A, none with its own IMA row (script)Colour and lustre Light to dark blue or green, white, gray, pale red, yellow; in thin section colorless to blue or pink; vitreousCleavage, fracture Fair on {010}, poor on {001} and {100}; subconchoidalHardness and density Hardness 7.5; density 3.40–3.58 measured, 3.486 calculated; a 20.00 g piece reads 14.12–14.41 g in waterOptics Biaxial (+) or (−); α 1.701–1.726, β 1.703–1.728, γ 1.705–1.734; 2V 47°–114°; pleochroism X colorless to pale yellow, Y sky-blue to bluish green, Z blue, sapphire-blue, dark blueThe 20-oxygen recast The Fiskenæsset analysis gives Mg 3.43, Al 8.94, Si 1.49 and Fe 0.14 per 20 oxygens, 14.00 cations, against the IMA formula’s 3.5, 9, 1.5 and 14The sapphire check Two gaps on the sheets: refractive index 0.025 (sapphirine’s highest 1.734, corundum’s lowest 1.759) and 0.56 g in water for a 20.00 g piece (14.41 g against 14.97 g)Name “For its typical sapphire-blue color” (sheet). The sheet marks no type locality; the IMA list gives Denmark (Greenland), 1819

Sapphirine is a magnesium aluminium silicate, Mg4(Mg3Al9)O4[Si3Al9O36] on the September 2026 IMA list: blue to green, monoclinic or triclinic, hardness 7.5, density 3.40 to 3.58, named for its sapphire-blue colour. It is not sapphire. Sapphire is corundum, Al2O3, hardness 9, density 3.98 to 4.10, and the two sheets’ refractive indices sit 0.025 apart.

In short

  • The mineral. The September 2026 IMA-CNMNC Master List lists sapphirine as Mg4(Mg3Al9)O4[Si3Al9O36], status G, 1819, Denmark (Greenland). The Handbook of Mineralogy sheet writes (Al,Mg)8(Al,Si)6O20: hardness 7.5, density 3.40 to 3.58, light to dark blue or green, vitreous, biaxial, in high-temperature metamorphic rocks “with abundant aluminum and magnesium and low silicon”. Worked, it is 66.50% Al2O3 and only 13.06% SiO2.
  • Sapphirine vs sapphire: the two-gap check. Sapphire is a variety of corundum, Al2O3, hardness 9. On the two sheets the refractive indices do not meet: sapphirine tops out at 1.734 and corundum starts at 1.759, a gap of 0.025. Weighed in water, a 20.00 g piece reads 14.12 to 14.41 g as sapphirine and 14.97 to 15.12 g as corundum, 0.56 g apart.
  • The 20-oxygen recast. The sheet’s one analysis, from Fiskenæsset, Greenland, recast by script to 20 oxygens, gives Al 8.94, Mg 3.43, Si 1.49 and Fe 0.14: 14.00 cations, reproducing the sheet’s printed formula. The IMA formula halved is Mg3.5Al9Si1.5O20, also 14 cations. In the sheet’s 2M cell (1312.1 Å3, Z = 4) the IMA composition gives a density of 3.493, against the printed 3.486.
  • As a cut stone. The GIA Gem Database record 33479 describes a 1.72 ct transparent marquise sapphirine, dark grayish blue: refractive index 1.704 / 1.710, birefringence 0.006, specific gravity 3.56, pleochroism brown / blue-green, no fluorescence under longwave or shortwave UV. Each figure sits inside the Handbook ranges; 3.56 reads 14.38 g in water.
  • Documented failure: spinel and kyanite. Two of sapphirine’s associates on its sheet sit inside its numbers. Spinel’s single index, 1.719, falls within sapphirine’s 1.701 to 1.734; kyanite overlaps it in index (1.710 to 1.734) and in water (14.33 to 14.52 g). Spinel is isotropic and kyanite scratches at 5.5 along its blade; the balance and refractometer alone do not separate them.
The sapphire check: sapphirine against corundum (sapphire) and the blue minerals its Handbook sheet names as associates. IMA formulas from the September 2026 list (by script); Handbook of Mineralogy values as printed (sapphirine and kyanite read against the rendered sheets); the GIA row is one cut stone; in-water weight of a 20.00 g piece = 20 − 20/D
SpeciesIMA formulaSystem; optical class (sheet)Refractive indices (sheet)HardnessDensity (meas.)20.00 g in waterSeparates from sapphirine?
SapphirineMg4(Mg3Al9)O4[Si3Al9O36]Monoclinic or triclinic; biaxial (+) or (−)α 1.701–1.726; γ 1.705–1.7347.53.40–3.5814.12–14.41 g—
Sapphirine, GIA record 33479 (cut, 1.72 ct)—Biaxial positive/negative (GIA)1.704 / 1.710—3.56 (SG)14.38 gInside every sheet range
Corundum (sapphire)Al2O3Hexagonal; uniaxial (−)ω 1.767–1.772; ε 1.759–1.76393.98–4.1014.97–15.12 gYes: index gap 0.025, weight gap 0.56 g
SpinelMgAl2O4Cubic; isotropicn 1.7197.5–83.6–4.114.44–15.12 gIndex no (1.719 inside); single index yes
KyaniteAl2OSiO4Triclinic; biaxial (−)α 1.710–1.718; γ 1.724–1.7345.5 ∥ [001], 7 ∥ [100]3.53–3.6514.33–14.52 gNo by index or weight; yes by blade hardness
CordieriteMg2Al3(Si5AlO18)Orthorhombic; biaxial (+) or (−)α 1.527–1.560; γ 1.537–1.5787–7.52.60–2.6612.31–12.48 gYes: 1.64 g lighter at the closest

What is sapphirine? The formula and the 20-oxygen recast

Sapphirine is Mg4(Mg3Al9)O4[Si3Al9O36] on the September 2026 IMA list, status G (grandfathered), 1819, Denmark (Greenland), first reference Göttingische Gelehrte Anzeigen 3 (1819). The Handbook of Mineralogy sapphirine sheet writes the same atoms per 20 oxygens, (Al,Mg)8(Al,Si)6O20. Worked on standard atomic weights the IMA formula weighs 1380.03 and is 66.50% Al2O3, 20.44% MgO and 13.06% SiO2: two-thirds alumina, a little silica.

The recast. The sheet’s analysis from Fiskenæsset reads SiO2 12.83, Al2O3 65.29, Fe2O3 0.93, FeO 0.65, MgO 19.78, LOI 0.31. Converted to moles and scaled to 20 oxygens by script it gives Si 1.490, Al 8.939, Mg 3.425, Fe3+ 0.081 and Fe2+ 0.063: 14.00 cations. The sheet prints (Al4.43Mg3.42Fe3+0.08Fe2+0.06)Σ=7.99(Al4.51Si1.49)Σ=6.00O20, the same numbers split across its two sites. The IMA formula halved is Mg3.5Al9Si1.5O20, so the Greenland analysis is within 0.08 of the ideal in magnesium, aluminium and silicon, with 0.14 iron besides. In the 2M cell (a 11.266, b 14.401, c 9.929 Å, β 125.46°, Z = 4) the ideal composition gives a density of 3.493, against the sheet’s 3.486 calculated and 3.40 to 3.58 measured.

What the sheet records. Monoclinic or triclinic, point group 2/m or -1, with cells printed for both the 2M polytype (P21/a) and the 1A (P-1); polytypes 1A, 2A, 2M, 3A, 4M and 5A. Crystals indistinct, tabular on {010}, to 3 cm; commonly as disseminated grains or aggregates; twinning repeated on {010}, uncommon. Cleavage fair on {010}, poor on {001} and {100}; fracture subconchoidal. Hardness 7.5. The IMA list has one row, Sapphirine; a case-insensitive search for “sapphirine-” finds no polytype row, so a 2M or 1A on a label is the polytype, not a separate species.

Sapphirine vs sapphire: is sapphirine a sapphire?

No: different species, different chemistry. Sapphire is a variety of corundum, Al2O3, which the live corundum page covers. Sapphirine is a silicate of magnesium and aluminium. The name is the link: the sheet says it is named “for its typical sapphire-blue color”, and its Z pleochroism colour is printed as “blue, sapphire-blue, dark blue”.

The two-gap check. On the corundum sheet ω is 1.767 to 1.772 and ε 1.759 to 1.763; sapphirine’s highest index is γ 1.734. A refractometer reading of 1.759 or more is on corundum’s side, 1.734 or less on sapphirine’s, and nothing on either sheet falls between. The balance agrees: measured density 3.40 to 3.58 against 3.98 to 4.10 means a 20.00 g piece reads 14.12 to 14.41 g in water as sapphirine and 14.97 to 15.12 g as corundum, 0.56 g apart at the closest. The method and its limits are on how to measure specific gravity at home. Hardness 7.5 against 9 is true but not a home test; see how to test mineral hardness properly.

They can share an address. Corundum is the fifth associate on the sapphirine sheet, and both sheets’ Distribution fields name Naxos, Greece, and Cortland in Westchester Co., New York (the sapphirine sheet says the Cortland complex, the corundum sheet the Cortland district). Corundum’s occurrence line reads “Al-rich, Si-poor”; sapphirine’s, “abundant aluminum and magnesium and low silicon”. This page’s check is not corundum’s one-reading rule against the garnets; those are on how to tell if garnet is real.

Is sapphirine a gemstone? What GIA recorded

A cut stone exists in GIA’s reference collection. GIA’s Gübelin Gem Project page lists sapphirine among uncommon stones in the Gübelin collection, which it describes as ranging “from occasional use in jewelry to those that are quite rare and seldom faceted because of the lack of suitable starting material”. Its record 33479 is a 1.72 ct transparent marquise, 9.99 × 6.37 × 4.15 mm, dark grayish blue: refractive index 1.704 / 1.710, birefringence 0.006, specific gravity 3.56, optical character biaxial positive/negative, pleochroism brown / blue-green, vitreous lustre, no phenomenon, and no fluorescence or phosphorescence under longwave or shortwave UV. The main internal feature is a group of fluid inclusions along a partially healed fracture.

Read against the sheet. 1.704 and 1.710 lie inside the printed α and γ ranges; 3.56 inside 3.40 to 3.58, reading 14.38 g in water for 20.00 g. The record is one stone. This page says nothing about how often sapphirine is cut, or what it is used for in jewellery; that is outside this site’s scope. The GIA record also gives a source country that the Handbook Distribution field does not list, so this page does not repeat it.

Colour, and thin section. The sheet prints light to dark blue or green, white, gray, pale red and yellow, and “in thin section, colorless to blue or pink”. Pleochroism: X colorless, pale reddish, yellowish green or pale yellow; Y sky-blue, lavender-blue or bluish green; Z blue, sapphire-blue or dark blue. Dispersion moderate to very strong, r less than v; 2V from 47° to 114°, so the optic sign can be either.

Where is sapphirine found? The sheet’s localities

The Distribution field, as printed. “Only a few localities are given, which have provided especially large or fine crystals, or rich material. Around Fiskenæsset, Greenland. In the USA, in the Cortland complex, Westchester Co., New York. In Canada, at Wilson Lake, Labrador, Newfoundland. At Sakena, Vorokafotra, Bekily, Anjamiary, and Betroka, Madagascar. Large crystals from Blinkwater, near Messina, Transvaal, South Africa. In Tanzania, at Mautia Hill. From Waldheim, Saxony, Germany. At Naxos, Greece. From Finero, Val Viggezo, Piedmont, Italy. In the Harts Range, Northern Territory, Australia. From the Napier complex, Casey Bay, Enderby Land, Antarctica.” The sheet marks no type locality; what the term means is on what is a type locality.

The company it keeps. Occurrence: “In high-temperature metamorphic rocks or xenoliths with abundant aluminum and magnesium and low silicon. May occur as a primary magmatic mineral in subsilicic rocks.” Associates: sillimanite, kyanite, cordierite, kornerupine, corundum, surinamite, phlogopite, chrysoberyl, pyroxenes, spinel, garnet, calcite and quartz. Its X-ray pattern, the sheet says, closely resembles surinamite’s, and the IMA list writes surinamite Mg3Al3O(Si3BeAlO15) and khmaralite Mg4(Mg3Al9)O4[Si5Be2Al5O36], the second on sapphirine’s own bracket pattern with beryllium in it.

Not sapphirine. “Sapphirine glass”, a phrase people search alongside the mineral, is not covered here. More species are in the species index. We hold no catalogue and nothing here is offered for sale; the wanted list is the only commercial route.

Questions

What is the formula of sapphirine?
Mg4(Mg3Al9)O4[Si3Al9O36] on the September 2026 IMA list; (Al,Mg)8(Al,Si)6O20 on the Handbook of Mineralogy sapphirine sheet. Worked: 66.50% Al2O3, 20.44% MgO, 13.06% SiO2.
What is the difference between sapphirine and sapphire?
Sapphire is corundum, Al2O3, hardness 9, density 3.98 to 4.10. Sapphirine is a magnesium aluminium silicate, hardness 7.5, density 3.40 to 3.58; its indices stop 0.025 below corundum’s on the corundum sheet.
Is sapphirine a gemstone?
It has been cut: the GIA Gem Database record 33479 describes a 1.72 ct dark grayish blue marquise, refractive index 1.704 / 1.710, specific gravity 3.56.
What colour is sapphirine?
Light to dark blue or green, white, gray, pale red or yellow on its Handbook sheet; colorless to blue or pink in thin section. It is named for its typical sapphire-blue colour.
Does sapphirine fluoresce?
Its sheet prints no luminescence, and GIA record 33479 reports none under longwave or shortwave UV for that stone.