Collecting · Identification

Is franklinite magnetic?

Is franklinite magnetic? Yes, variably: its sheet says strongly to weakly magnetic. Of 22 spinel-group Handbook sheets, 9 print any magnetic property.

Short answer Yes, but not uniformly: the Handbook sheet for franklinite, ZnFe3+2O4, prints “Strongly to weakly magnetic”The mineral A zinc iron oxide species of the spinel group; crystal habit octahedra to 22 cm, spinel-law twin on {111}; hardness about 6; density 5.05–5.22; iron-black; lustre metallic; streak reddish brown to black; 46.33% iron, 27.12% zincWhere, and with what Franklin and Sterling Hill, New Jersey, first on the sheet: a mine district whose ore specimens pair franklinite with willemite, zincite and calcite, plus manganese mineralsUSGS OFR 99-529, Table 1 Franklinite, 7 samples: 0.01–0.40 A in total, best 0.10–0.20 A, on a laboratory separator; magnetite best 0.01 AThe spinel wording ledger Of 22 Handbook sheets filed in the spinel group (cached 18 November 2026), 9 print a magnetic property: 4 “Strongly magnetic”, franklinite “Strongly to weakly”, 2 “Weakly”, chromite “Some samples are weakly”, zincochromite “Weakly paramagnetic”One of a kind Of 670 Handbook sheets cached here on 18 November 2026, franklinite’s is the only one printing “strongly to weakly magnetic”, by scriptLustre pattern All 9 sheets that print a magnetic property describe a metallic, submetallic or semimetallic lustre; all 5 vitreous spinel-group sheets print noneDocumented failures Cuprospinel has the same Fe3+2O4 formula pattern and prints nothing; qandilite, TiMg2O4 on the IMA list, prints “Strongly magnetic”; gahnite prints nothing yet USGS drew it at 0.20–0.70 A

Yes, but variably. The Handbook sheet for franklinite, ZnFe3+2O4, hardness about 6, says “Strongly to weakly magnetic”, and of 670 Handbook sheets cached here on 18 November 2026 it is the only one with that wording. USGS drew 7 franklinite samples on a separator at 0.01 to 0.40 amp, best 0.10 to 0.20; magnetite’s best was 0.01.

In short

  • The verdict. The Handbook of Mineralogy franklinite sheet ends its physical properties “Strongly to weakly magnetic.” A script over all 670 sheets cached here on 18 November 2026 finds that phrase on no other. The September 2026 IMA-CNMNC Master List lists franklinite as ZnFe3+2O4, status G, 1819, USA; worked, it is 46.33% iron and 27.12% zinc.
  • The separator figures. USGS Open-File Report 99-529, Table 1 drew 7 franklinite samples at 0.01 to 0.40 A, best 0.10 to 0.20 A, on a Frantz isodynamic separator with 125 to 150 µm grains. Magnetite, “Strongly magnetic” on its sheet, is below 0.01 to 0.05 A, best 0.01. They are the same figures as on the franklinite species page.
  • The spinel wording ledger. Of 22 cached Handbook sheets whose Mineral Group line names spinel, 9 print a magnetic property and 13 print none. Four say “Strongly magnetic”: magnetite, magnesioferrite, trevorite and qandilite. Franklinite alone gives a range. Jacobsite and magnesiochromite say “Weakly magnetic”, chromite “Some samples are weakly magnetic”, zincochromite “Weakly paramagnetic”.
  • Read it as a rule, with its failures. All 9 sheets that print a magnetic property describe a metallic, submetallic or semimetallic lustre, and all 5 vitreous sheets (gahnite, hercynite, spinel, galaxite, thermaerogenite) print none. But cuprospinel, with franklinite’s Fe3+2O4 pattern, prints nothing; three metallic sheets print nothing; and gahnite, silent, still drew at 0.20 to 0.70 A.
  • The other questions. Fluorescent: the sheet records no luminescence, and the FMS Fluorescent Mineral Database franklinite page read “Sorry! Nothing found” on 18 November 2026. Radioactive: ZnFe3+2O4 holds no uranium, thorium or potassium; see is my mineral radioactive. Toxicity questions go to toxic minerals in a collection; this page is not safety advice.
The spinel wording ledger: every Handbook of Mineralogy sheet cached in refcache/hom on 18 November 2026 whose Mineral Group line names spinel (22 sheets, script scripts/spinel_ledger.py), with the IMA formula from the September 2026 list, whether that formula has Fe3+2 on the B site, the lustre and the magnetic wording exactly as each sheet prints them, and the USGS Open-File Report 99-529 Table 1 best range in amps where a row exists (number of samples; dc = depends on chemistry). Ordered by wording, then lustre
SheetIMA formulaFe3+2 on B (IMA)Lustre (sheet)Magnetism (sheet, as printed)USGS best range, A (samples)
MagnetiteFe2+Fe3+2O4YesMetallic to submetallic, may be dullStrongly magnetic0.01 (6)
MagnesioferriteMgFe3+2O4YesMetallic to semimetallic, may be dullStrongly magneticno row
TrevoriteNiFe3+2O4YesMetallicStrongly magneticno row
QandiliteTiMg2O4No (sheet formula has Fe2+, Fe3+)MetallicStrongly magneticno row
FrankliniteZnFe3+2O4YesMetallic to semimetallic; may be dullStrongly to weakly magnetic0.10–0.20 (7)
JacobsiteMn2+Fe3+2O4YesMetallic, splendent to semimetallic, dullWeakly magneticno row
MagnesiochromiteMgCr2O4NoMetallicWeakly magneticno row
ChromiteFe2+Cr2O4NoMetallic to submetallicSome samples are weakly magnetic0.30–0.40 (9)
ZincochromiteZnCr2O4NoSemimetallicWeakly paramagneticno row
CuprospinelCu2+Fe3+2O4YesNot printedNothing printedno row
CochromiteCoCr2O4NoMetallicNothing printedno row
CoulsoniteFe2+V3+2O4NoMetallicNothing printedno row
MagnesiocoulsoniteMgV2O4NoMetallicNothing printedno row
ManganochromiteMn2+Cr2O4NoNot printedNothing printedno row
VuorelaineniteMn2+V3+2O4NoNot printedNothing printedno row
UlvöspinelTiFe2+2O4NoNot printedNothing printedno row
GuiteCo2+Co3+2O4NoNot printed (property fields blank)Nothing printedno row
GahniteZnAl2O4NoVitreousNothing printed0.40–0.50 (2)
HercyniteFe2+Al2O4NoVitreousNothing printed0.30–0.40 (2)
SpinelMgAl2O4NoVitreous, splendent to dullNothing printed0.50–1.00, dc (3)
GalaxiteMn2+Al2O4NoVitreousNothing printedno row
ThermaerogeniteCuAl2O4NoVitreousNothing printedno row

Is franklinite magnetic? What the sheet says

Yes, strongly to weakly. The Handbook of Mineralogy franklinite sheet (the lowercase PDF address is a 404; the capitalised one is the sheet) prints, after hardness about 6 and density 5.05 to 5.22 measured: “Strongly to weakly magnetic.” The sheet does not say which specimens are which, or why. A script over every Handbook sheet cached here, 670 on 18 November 2026, finds the words strongly to weakly magnetic, in any case and across line breaks, on the franklinite sheet only.

What USGS measured. USGS Open-File Report 99-529, Table 1, by Rosenblum and Brownfield, records the current at which a Frantz isodynamic separator, side tilt 15°, pulls 125 to 150 µm grains: franklinite 0.01 to 0.40 A in total and 0.10 to 0.20 A at best, over 7 samples. The report defines ferromagnetic minerals as “strongly attracted to a magnet, like a piece of iron”, naming magnetite, maghemite, pyrrhotite and pentlandite, and paramagnetic minerals as separable at up to 1.70 A. It also warns that micro-inclusions of magnetite make the lower limit “difficult or impossible to determine”.

Agreeing with the species page. Franklinite gives these same separator figures and a recast of the sheet’s analyses; neither is repeated here. The spinel separator rows, chromite to spinel, are ranked on is chromite magnetic, and the question across all minerals is on which minerals are magnetic.

How do other spinels compare? The spinel wording ledger

Method. Every sheet in this site’s Handbook cache whose Mineral Group line contains the word spinel was read by script on 18 November 2026: 22 sheets, 11 of them fetched that day while completing the IMA rows written as one cation, two of a second, and O4 (chihmingite has no sheet; the hetaerolite, hausmannite, xieite and chenmingite sheets carry no Mineral Group line and are outside the set). From each, the magnetic wording in the physical-properties paragraph and the text after Luster were taken as printed. The set is the cache, not every spinel-supergroup species.

Result. 9 of the 22 print a magnetic property. Strongly magnetic: magnetite, magnesioferrite, trevorite, qandilite. Strongly to weakly: franklinite. Weakly magnetic: jacobsite, magnesiochromite. Some samples are weakly magnetic: chromite. Weakly paramagnetic: zincochromite. The other 13 print nothing. Of the 6 whose IMA formula has Fe3+2 on the B site, the ferrites, 5 print a magnetic property and 3 of those say strongly; franklinite is the ferrite whose sheet allows the weak end.

The lustre pattern. All 9 sheets that print magnetism describe a metallic, submetallic or semimetallic lustre. All 5 vitreous sheets, gahnite, hercynite, spinel, galaxite and thermaerogenite, print none. In Franklin ore, whose associates on the franklinite sheet open with zincite and willemite, neither of which prints a magnetic property, the black, metallic one is the franklinite; gahnite, in the same association, is vitreous and silent.

When the ledger fails: three documented exceptions

Same formula, no wording. Cuprospinel is Cu2+Fe3+2O4 on the IMA list, franklinite’s pattern with copper for zinc, and its sheet prints no magnetic property and no lustre. A silent sheet is not a tested negative: the Handbook records what its sources reported.

Metallic, and silent. Cochromite, coulsonite and magnesiocoulsonite all print a metallic lustre and no magnetic property. So lustre predicts the wording one way only: every magnetic sheet is metallic, but not every metallic sheet is magnetic.

Strong, without iron in the IMA formula. Qandilite is TiMg2O4 on the IMA list, with no iron, yet its sheet prints “Strongly magnetic”; the sheet’s own formula, (Mg,Fe2+)2(Ti,Fe3+,Al)O4, writes iron in. And the reverse: gahnite, ZnAl2O4, prints nothing, yet USGS Open-File Report 99-529, Table 1 drew it at 0.20 to 0.70 A. The IMA end-member formula is a name, not an analysis; the measured behaviour of a real specimen depends on what is in it, as is goethite magnetic and is hematite magnetic also show for iron oxides.

Is franklinite radioactive, fluorescent or an ore?

Radioactive? The IMA formula, ZnFe3+2O4, contains no uranium, thorium or potassium, and the sheet prints no radioactivity; is my mineral radioactive covers how to check a specimen. Fluorescent? The sheet records no luminescence, and the FMS Fluorescent Mineral Database franklinite page, fetched again on 18 November 2026, read “Sorry! Nothing found”; the glow on Franklin specimens is the subject of is willemite fluorescent.

An ore of? The sheet does not use the word ore for franklinite and names no use. Worked on standard atomic weights, ZnFe2O4 is 27.12% zinc, 46.33% iron and 26.55% oxygen, the figures on the species page. Where is it found? Distribution opens “From Franklin and at Sterling Hill, Ogdensburg, Sussex Co., New Jersey, USA”, then Långban, Sweden; Hraničná, Czech Republic; Kazakhstan; Siberia; India; and Western Australia; the district is on Franklin and Sterling Hill.

Toxic? Questions about handling zinc and iron minerals go to toxic minerals in a collection; this page gives no health or safety advice. More guides are in the collecting guides. We hold no catalogue and nothing here is offered for sale; the wanted list is the only commercial route.

Questions

Is franklinite magnetic?
Yes, variably: the Handbook franklinite sheet says “Strongly to weakly magnetic”, and USGS drew it at 0.01 to 0.40 A, best 0.10 to 0.20 A.
Is franklinite more magnetic than magnetite?
No. In USGS Open-File Report 99-529, Table 1 magnetite’s best range is 0.01 A and franklinite’s 0.10 to 0.20 A; a lower current means a stronger pull.
Is franklinite fluorescent?
Its sheet records no luminescence, and the FMS Fluorescent Mineral Database franklinite page had no franklinite records when fetched on 18 November 2026.
Is franklinite radioactive?
Its formula, ZnFe3+2O4, contains no uranium, thorium or potassium, and its sheet prints no radioactivity. See is my mineral radioactive.
How do you tell franklinite from gahnite at Franklin?
Franklinite’s sheet gives metallic lustre, a reddish brown to black streak and magnetism; gahnite’s gives vitreous lustre, a grey streak, hardness 7.5 to 8 and no magnetic wording.