Is kyanite UV reactive?
Kyanite’s Handbook sheet is silent, but 9 FMS specimen records fluoresce: red under a 365 nm LED in 8, blue under shortwave in 2, from one Virginia locality.
Sometimes. Kyanite’s Handbook sheet prints no fluorescence, but all 9 kyanite records in the Fluorescent Mineral Society database fluoresce: 8 red under a 365 nm longwave LED and 2 blue under 254 nm shortwave, both of those from Willis Mountain, Virginia. None records midwave. A silent sheet is not a negative, and a red glow is not proof of kyanite.
In short
- The sheet is silent. The Handbook of Mineralogy kyanite sheet gives Al2SiO5, triclinic, hardness 5.5 along [001] and 7 along [100], density 3.53–3.65, blue, white, rarely green, gray, yellow, pink or black. A ligature-aware search finds no fluorescence, phosphorescence or luminescence on it, nor on the andalusite or sillimanite sheets; it does find the wording on the hemimorphite and willemite sheets, the positive controls.
- The records are not. The Fluorescent Mineral Society database (FMDB) kyanite page links 9 kyanite records, fetched and read by script on 18 November 2026, contributed between December 2024 and April 2026. All 9 carry a kyanite fluorescence line: 8 red under longwave, every one logged with a 365 nm LED, and 2 blue under shortwave, both with a 254 nm mercury lamp. None lists midwave, afterglow or phosphorescence. The International Gem Society kyanite article agrees: “Variable fluorescence, mostly dim red in LW.”
- The Willis Mountain split. Both shortwave-blue records come from Willis Mountain, Buckingham County, Virginia, and one of them is also red under longwave. The longwave-red records span 7 localities: Willis Mountain, the Harts Range in Australia, Mysore in India, Minas Gerais (twice), Skardu in Pakistan, Plast in Russia and the Keivy Mountains. Five descriptions state no response under midwave or shortwave. Red under longwave is the general record; blue under shortwave, in this database, is Willis Mountain’s.
- Documented failure: ruby and the sample. On 2 records, from the Harts Range and Mysore, ruby (corundum) on the same piece is also red under longwave, and the corundum sheet says it “May fluoresce or phosphoresce under UV”: the colour cannot say which grain glows. And the database collects fluorescent pieces: one contributor writes that “Most blue kyanite from Brazil is non-fluorescent.” Nine records give no rate.
- Lamps, not advice. On the band definitions in the ICNIRP 2004 guidelines on ultraviolet exposure, 365 nm sits in UVA and 254 nm in UVC. Exposure limits are in that document; this page gives no lamp-safety instruction and is not safety advice. The general background is fluorescent minerals explained and lamp choice best UV lamp for mineral collecting.
| FMDB record | Locality as recorded | Longwave, 365 nm LED | Shortwave, 254 nm mercury | Midwave | Also fluorescing on the piece | Description |
|---|---|---|---|---|---|---|
| 33 | Willis Mountain Mine, Buckingham Co., Virginia, USA | Red | Blue | — | — | Dim to very dim red LW; brighter light blue SW |
| 603 | Willis Mountain, Buckingham Co., Virginia, USA | — | Blue | — | — | Kyanite in quartz |
| 118 | Harts Range, Northern Territory, Australia | Red | — | — | Ruby, red LW | Stated none under MW or SW |
| 120 | Mysore District, Karnataka, India | Red | — | — | Ruby, red LW | Stated none under MW or SW |
| 251 | Minas Gerais, Brazil | Red | — | — | — | Stated none; “Most blue kyanite from Brazil is non-fluorescent” |
| 921 | Minas Gerais, Brazil | Red | — | — | — | Needs a powerful LW LED, per the contributor |
| 254 | Skardu Area, Gilgit-Baltistan, Pakistan | Red | — | — | — | Stated none under MW or SW |
| 272 | Borisovskie Sopki deposit, Plast, Chelyabinsk, Russia | Red | — | — | — | Stated none under MW or SW |
| 255 | Keivy Mountains, Murmansk, Russia | Red | — | — | Chiastolite, red LW | Filed as chiastolite and kyanite |
| All 9 | 7 localities | 8 red | 2 blue, both Willis Mountain | 0 | Ruby on 2 | 5 state none under MW and SW |
Is kyanite UV reactive? What its Handbook sheet says
Nothing, read carefully. The Handbook of Mineralogy kyanite sheet lists cleavage, fracture, hardness and density among its physical properties and stops there: no fluorescence, phosphorescence or luminescence. Older sheets render the fl ligature as a stray glyph, so the search matches that form too; it finds “may °uoresce bluish under SW UV” on the hemimorphite sheet and “strongly °uorescent” on the willemite sheet, the positive controls, and nothing on kyanite. The andalusite and sillimanite sheets, its two polymorphs, are silent as well.
Kyanite itself. The September 2026 IMA-CNMNC Master List writes it Al2OSiO4, A, 1967 s.p., Austria; the sheet writes Al2SiO5 and calls it trimorphous with andalusite and sillimanite. Triclinic, bladed and tabular on {100}, to 0.5 m, typically bent or twisted; cleavage perfect on {100}, good on {010}; hardness 5.5 along [001] and 7 along [100]; density 3.53–3.65, so a 20.00 g piece reads 14.33–14.52 g in water, the figure on is kyanite a feldspar. A silent sheet records what its authors listed; it is not a test result.
Does kyanite glow under UV? Nine FMDB records
Method. The Fluorescent Mineral Society database (FMDB) kyanite page linked 9 specimen records on 18 November 2026. A script read each record’s “Summary of luminescence responses” and kept the lines under its Kyanite heading: band, lamp and colour, exactly as printed. The records were contributed between December 2024 and April 2026 by three members.
Result. All 9 have at least one kyanite fluorescence line. Longwave: 8 records, all red, all logged as “Longwave (365nm LED)”. Shortwave: 2 records, both blue, both “Shortwave (254nm Lamp/Mercury)”. Midwave: none. No record lists afterglow or phosphorescence. The International Gem Society kyanite article gives kyanite’s luminescence as “Variable fluorescence, mostly dim red in LW”, so the two sources agree on the band and the colour. The same FMDB fetch found 163 willemite records, so an empty page means no entries rather than a failed fetch.
Red or blue? The Willis Mountain split
Where each response comes from. Both shortwave-blue records are from Willis Mountain, Sprouses Corner, Buckingham County, Virginia, a locality the kyanite sheet also names. One of them, record 33, shows red under longwave too; its description reads “Kyanite often shows a dim to very dim red fluorescence under longwave UV light. In addition to the longware [sic] red, this specimen also shows a quite brighter light blue fluorescence under shortwave UV.” The longwave-red records come from 7 localities: Willis Mountain, the Harts Range, Mysore, Minas Gerais twice, Skardu, Plast and the Keivy Mountains.
The rule it gives. Five of the red-longwave records, 118, 120, 251, 254 and 272, say in their descriptions that the piece does not respond under midwave or shortwave. In this database, red under a longwave LED is kyanite’s general response, and blue under shortwave belongs to one Virginia locality. That is a pattern in 9 records, not a law; a shortwave-blue kyanite from elsewhere would simply be the tenth.
Where the records mislead: ruby, chiastolite and the lamp
Documented failure: two red minerals on one piece. Records 118 and 120 are ruby and kyanite together, from the Harts Range and Mysore, and their summaries list “Corundum var. Ruby” red under longwave as well as kyanite. The corundum sheet says it “May fluoresce or phosphoresce under UV.” On such a piece a red glow cannot by itself say which grain is responding. Record 255 is filed under chiastolite and kyanite; its contributor writes that the material is “actually a kyanite pseudomorph from andalusite”.
Documented failure: the sample. The database collects pieces that glow, so its 9 out of 9 is not a rate. The contributor of record 251 writes that “Most blue kyanite from Brazil is non-fluorescent”, and the contributor of record 921 that you should not “expect to see this under archaic blacklights - you need a powerful LW LED.” Every longwave line in the 9 records is logged with a 365 nm LED. A kyanite that stays dark under a weak lamp has not been shown to be non-fluorescent; the IGS word is “dim”. For comparison with other answers on the site, see is sodalite UV reactive and is hemimorphite UV reactive.
Is kyanite rare, a gemstone, fragile or toxic?
Brief answers from the sources fetched. Rare? The sheet’s Distribution field opens “Widely distributed, even in good crystals”, from the Zillertal, Austria, and Alpe Sponda, Switzerland, to Minas Gerais, Kenya and Willis Mountain. A gemstone? The International Gem Society kyanite article treats it as a cut gem and calls it “notoriously difficult to facet because of its perfect cleavage and variable hardness”. Fragile? The sheet gives perfect cleavage on {100}, good on {010}, a parting on {001} and splintery fracture; the differences are on cleavage, parting or fracture. Toxic or water safe? The sheet prints no hazard or solubility wording, and this page gives no care advice; hazard questions go to toxic minerals in a collection, which is not advice.
Lamps and exposure. The ICNIRP 2004 guidelines on ultraviolet exposure divides ultraviolet into UVA, 315 to 380–400 nm, UVB, 280 to 315 nm, and UVC, 100 to 280 nm. The FMDB’s 365 nm LED is therefore UVA and its 254 nm mercury lamp UVC. Exposure limits are set out in that document; this page does not restate or apply them and is not safety advice. Other polymorph questions are on is kyanite a feldspar and is staurolite a garnet; more guides are in the collecting guides. Nothing on this site is offered for sale; the wanted list is the only commercial route.