Kernite
Kernite, Na2B4O6(OH)2·3H2O: a sodium borate ore of Boron, California, hardness 2.5, density 1.906, 15.82% boron, soluble in water and altering to tincalconite.
Kernite is a sodium borate, Na2B4O6(OH)2·3H2O on the September 2026 IMA list: colourless, monoclinic, hardness 2.5, density 1.906, in cleavable masses to 3.5 m. Worked, it is 15.82% boron. Its Handbook sheet calls it an important ore mineral of borax, from Boron, Kern County, California, Argentina and Turkey; the USGS says kernite was used to produce boric acid.
In short
- The mineral. The September 2026 IMA-CNMNC Master List lists kernite as Na2B4O6(OH)2·3H2O, status G, 1927, USA; the Handbook of Mineralogy sheet prints the same formula. Monoclinic; cleavable masses to 3.5 m, bent or warped; perfect cleavages on {100} and {001}; hardness 2.5; density 1.906; colourless; soluble in water. Worked on standard atomic weights it is 15.82% boron and 16.83% sodium by mass.
- Kernite is an ore of what? Of boron, and of borax. The sheet: “An important ore mineral of borax in sedimentary borate deposits.” The USGS 2026 boron summary says the leading US producer mined borate ores containing kernite, tincal and ulexite, and that kernite was used to produce boric acid; it names colemanite, kernite, tincal and ulexite as 90% of the borate minerals used by industry worldwide.
- The tincalconite crossroads. Kernite, tincalconite and borax all reduce to Na2B4O7 with water: 4, 5 and 10 waters. The kernite sheet says it turns white if surficially altered to tincalconite; the borax sheet says borax rapidly dehydrates in air to tincalconite. Worked, kernite gains 6.59% of its mass to reach tincalconite, and borax loses 23.62%. One white crust, two directions.
- The boron ledger. By mass: kernite 15.82%, colemanite 15.78%, tincalconite 14.84%, ulexite 13.34% and borax 11.34%. Of these five borates, all named on the kernite sheet or in its alteration, kernite carries the most boron per gram; the colemanite and ulexite figures agree with their species pages.
- Documented failure: the hand tests. Hardness 2.5 is shared with ulexite, and borax is 2 to 2.5. The balance is ruled out: the sheet says kernite is soluble in water, so this page gives no in-water weight. What does work is the habit: big cleavable, splintery, flexible masses with a satiny lustre on fibrous cleavages.
| Species | IMA formula | As Na2B4O7·nH2O | Boron by mass | Mass change to tincalconite | Hardness | Density (meas.) | Water on the sheet |
|---|---|---|---|---|---|---|---|
| Kernite | Na2B4O6(OH)2·3H2O | n = 4 | 15.82% | +6.59% (gains water) | 2.5 | 1.906 | Soluble in H2O; white if surficially altered to tincalconite |
| Tincalconite | Na2B4O5(OH)4(H2O)3 | n = 5 | 14.84% | — | n.d. | 1.880 | Typically a dehydration product of other borates |
| Borax | Na2B4O5(OH)4(H2O)8 | n = 10 | 11.34% | −23.62% (loses water) | 2–2.5 | 1.715 | Soluble in H2O; rapidly dehydrates in air to tincalconite |
| Ulexite | NaCaB5O6(OH)6(H2O)5 | — | 13.34% | — | 2.5 | 1.955 | Slightly soluble in H2O |
| Colemanite | CaB3O4(OH)3(H2O) | — | 15.78% | — | 4.5 | 2.423 | No solubility line used here |
What is kernite? The formula and what it is made of
Kernite is Na2B4O6(OH)2·3H2O on the September 2026 IMA list, status G (grandfathered), 1927, USA, first reference American Mineralogist 12 (1927), 24. The Handbook of Mineralogy kernite sheet prints the same formula. On standard atomic weights the formula mass is 273.27: 15.82% boron and 16.83% sodium. As oxides that is B2O3 50.95, Na2O 22.68 and H2O 26.37, exactly the ideal column on the sheet.
The Kern County analysis, recast. The sheet’s analysis from Kern Co., California, reads B2O3 50.76, Na2O 22.63, H2O 26.50, total 99.89. Recast by script on four boron atoms it gives Na 2.003 and water equal to 4.035 H2O, against the ideal 2 and 4 (two hydroxyls count as one water, plus three molecules). The cell check agrees too: a = 7.0172, b = 9.1582, c = 15.6774 Å, β = 108.861°, Z = 4 give 953.4 ų and a density of 1.904, against the printed 1.905 calculated and 1.906 measured.
What the sheet records. Monoclinic, point group 2/m, space group P21/c. Crystals commonly nearly equant, with over 30 forms noted; typically as cleavable masses, to 3.5 m, bent or warped; massive. Twinning on {011}. Cleavage on {100} and {001}, perfect; on {-102}, fair. Fracture splintery; flexible and elastic in cleavage fragments. Hardness 2.5. Colourless; streak white; vitreous, satiny on fibrous cleavages. Biaxial (−), α 1.454, β 1.472, γ 1.488, 2V 80°. The structure reference on the sheet is Cooper, Larsen and Coppens, American Mineralogist 58 (1973), 21.
Kernite is an ore of what? Boron, borax and boric acid
The sheet. The Occurrence field reads: “An important ore mineral of borax in sedimentary borate deposits, deposited under warm conditions or formed by metamorphism.” Its associates are borax, inyoite, ulexite and colemanite.
The USGS. The USGS Mineral Commodity Summaries 2026, boron says three companies in southern California produced borates in 2025; that the leading producer mined borate ores containing the minerals kernite, tincal and ulexite by open pit methods; and that kernite was used to produce boric acid, tincal sodium borate, and ulexite specialty glasses and ceramics. It adds that four borate minerals, colemanite, kernite, tincal and ulexite, account for 90% of the borate minerals used by industry worldwide, and that boron does not occur in nature in an elemental state. This page repeats nothing from the summary about markets.
Worked, one formula unit at a time. Kernite and borax share the Na2B4O7 core, so 1 kg of kernite carries the sodium and boron of 1.396 kg of borax, Na2B4O5(OH)4·8H2O; the difference is 6 waters. That is arithmetic on the two formulas, not a description of any plant process.
Kernite, tincalconite or borax? The tincalconite crossroads
One core, three waters. The IMA list writes borax Na2B4O5(OH)4(H2O)8, tincalconite Na2B4O5(OH)4(H2O)3 (G, 1878, USA) and kernite Na2B4O6(OH)2·3H2O. Each reduces to Na2B4O7·nH2O, with n = 10, 5 and 4. The tincalconite sheet says it is “Typically a dehydration product of other borates”, named from tincal, an old name for borax, and the Greek for powder, after its powdery habit; the borax sheet says borax “rapidly dehydrates in air to tincalconite”; and the kernite sheet says kernite is “white if surficially altered to tincalconite”.
The rule, worked. Borax reaching tincalconite loses 5 waters, 23.62% of its mass: the white powder the borax sheet describes. Kernite reaching tincalconite gains one, 6.59% of its mass. So a white skin on kernite and a white crust on borax can be the same species, arrived at from opposite sides. The sheets give no rate or humidity for either change, and this page gives none.
Documented failure. The tincalconite sheet’s phrase “dehydration product” fits borax, not kernite: by formula, kernite would have to take water up. The sheets do not explain the kernite route, and neither does this page. All three species share their first localities: the kernite, tincalconite and borax sheets each name the Kramer borate deposit, Boron, Kern Co., and the kernite and tincalconite sheets also name the Tincalayu deposit in Argentina and the Kirka deposit in Turkey.
Where is kernite found? Boron, Tincalayu and Kirka
The Distribution field, as printed. “From the Kramer borate deposit, Boron, Kern Co., California, USA. In the Tincalayu borax deposit, Salar del Hombre Muerto, Salta Province, Argentina. From the Kirka borate deposit, Kütahya Province, Turkey.” Three localities, and the sheet marks none of them as the type locality; type material is at Harvard University and the National Museum of Natural History, Washington. The IMA list gives the country only, USA. What the term means is on what is a type locality.
The name. “For Kern Co., California, USA, in which Boron is located.” The town and the element share a name; the mineral takes the county’s. The X-ray powder pattern on the sheet is from Tincalayu.
The other Boron borates on this site. Ulexite and colemanite name Boron on their own sheets; their in-water ladder is on the ulexite page, and the satin-spar confusion on is ulexite selenite. Howlite is the borosilicate. Kernite cannot join the in-water comparison, because its sheet says it is soluble in water. Questions about borate dust go to toxic minerals in a collection; this page is not health or safety advice. More species are in the species index. We hold no catalogue and nothing here is offered for sale; the wanted list is the only commercial route.